Products
Home Page TopProductsTraditional Measuring Instruments and Tools
Traditional measuring Instruments and tools
Q.P.T. Innovation Technik Handels GmbH
Portable Roughness Tester RT-10
The Portable Roughness Tester RT-10 permits the measurement and evaluation of roughness parameters directly on the site of production offering the advantages of being easy to carry, and simple to use. With the integrated accessories like V-block, it can measure in difficult positions: on cylinders, in the vertical position, over- head position,…. The probe maybe turned by 90 degree to permit measurements in grooves between shoulders (e.g. crankshaft). On the integrated Display, which is shielded by a special protective membrane, the roughness parameters can be read easily. Up to 30 measurements can be saved to ensure the mobility. The recorder PR-10 in the lower picture is an option. The Japanese catalogue for RT-10 is available, please ask it by E-mail.
  
Dial Gauge Tester "TKU 40"
The Dial Gauge Tester "TKU 40" of Firm Q.P.T. is as follows. A traditional Testing Machine can check the electronic length gauging head always with the indicating unit, but the "TKU 40" has the combination an inductive and incremental Reference systems and so a length gauging head itself can be checked. It checks fully automatically inductive and incremental length gauging heads of the Firms Tesa, Mahr, Heidenhain etc. The testing time for an inductive length gauging head with a measuring range of ± 1mm requires under 30 seconds ! The test is done by the analog system. It checks also digitals dial gauges with Mitutoyo-electronics, Sylvac, Mahr etc. and then checks semi-automatically Microcators, dial comparator, test indicator, measuring unit without data output etc.
Advantages 1. The combination an inductive and incremental reference systems 2. The both reference systems start at each measuring cycle always from the absolute mechanical and electronic system Zero. That means, existing system error can be compensated mathematically. 3. An inductive length gauging head will be checked completely about linearity error. 4. The testing time for an inductive length gauging head with analog output is very quick.
Mechanics Measuring range : 0 - 50 mm Measuring speed : 2 mm/s Reference system : LIP401/inductive measuring system Resolution : 0.01 µm Absolute system accuracy : maximum 0.2 µm/50mm range at a temperature of 20ºC ± 0.5K
Please prepare a PC with Windows !
Contour measuring system "Conturomatic T2"
Firm Q.P.T. Innovation Technik Handels GmbH manufactures a contour measuring system "Conturomatic T2". It is a compact system however a large measuring volume of 250 x 320mm, and with highest precision and simple operation.
Advantages For this reason, not moving gauging head but moving workpiece, the measuring volume is very large. The mechanical construction, is based on the precision guide, whose traverse is counted non-contact incremental measuring system.
Mechanics Measuring range : 250(W) x 320(H) mm Measuring system : non-contact, optical incremental systems in all axes Internal resolution : 0.03 µm Operating speed : 40 mm/s Measuring speed : automatically optimization 0.5 - 3 mm/s
Styli of Contour Measuring Machine
The Micro Products Divison of Firm Wetzel AG was bought, and so we exchange Firm Wetzel to Firm Q.P.T. to import the similar goods. We will sell the Styli of contour measuring machines for Hommel, Mahr, Taylor Hobson, Zeiss-TSK and so on (in alphabetical order) in Europe and for Mitutoyo in Japan too.
| | Stylus 33mm, Carbide / Clamping length 30.5mm, Diameter 3.5mm Radius 25µm / Angle 12° |
| | Stylus 32mm, Carbide / Clamping length 29.1mm, Diameter 3mm Radius 20µm / Angle 30° |
| | Stylus 2.5mm, Carbide / Clamping length 2.5mm, Diameter 0.5mm Radius 25µm / Angle 19° |
| | Stylus 20mm, Carbide / Clamping length 20mm, Diameter 1mm Radisu 10µm / Angle 30° |
  Please ask Japanese catalogues for "RT-10" by E-mail.
Home page of Q.P.T.
M-Service & Geräte
Portable Optical Microscope was imported through Firm Q.P.T. before. From April 2012 we can import directly from the manufacturer, M-Service & Geräte.
Portable Optical video Microscope (with USB-Kamera) for Printing Industry
   CIL-ZX-USB | The Cellcheck CIL-ZX-USB System This system is mainly used for checking and inspecting reflective surfaces. Thanks to the coaxial light there is no irritating reflection which might lead to misinterpretation and wrong measurement. The Cellcheck CIL is always supplied with the MST stand which has proven particularly stable on flat materials and rollers. The delivery carried out in a stabil aluminium case plus CCD-Color camera; sidewise and coaxial illumination; 2x, 4x, 6x and 10x objektive; stand MST. The Analysis Software "METRIC in Japanese" is also prepared with option, and this software is fully worked-out for Print- & Emboss Industry. |
| |
| | | |
Flexo plates with and without coaxial illumination | Roller gravure without and with coaxial illumination |
Video Inspection System V7000 with the great focalisation range
The Main advantage of this system is the easy handling and the great focalisation range . The concept is to build a system for fast inspection of workpieces with different maginifications via a macro Zoom objective. During the inspection, the operator chooses his desired magnification by turning the ring on the objective. No height adjustment is needed. With the cold light source with slot-ringlight and a USB camera full screen images on a 20" screen are possible. In combination with a PC memorisation and full documentation is also possible. There is another type with special objective with very high focalisation range (approx. 30mm) not with a macro Zoom objective. This system has flexibility as a modular design of the right picture using 2 cameras, and this is used to inspect tools using one Zoom camera and one special camera. The 3 picture of the lower side are sample imades with Zoom camera.
  Please ask Japanese catalogues for "Portable Optical Video Microscope" by E-mail.
Home page of M-Service & Geraete
Käfer Meßuhrenfabrik GmbH & Co. KG
Firm Käfer Meßuhrenfabrik GmbH & Co. KG, Germany is manufacturer for Dial gauges, Test Indicator and so on. The picture shows the Käfer Test Indicator with 0.002mm reading.
Home Page of Firm Käfer
AG Davis-AA Gage
Groove Gage
A trading company asked us as follows. He saw the company name of "A.G. Davis" (A.G. Davis - AA Gage) from our web site, because he was asked by one of his customers about a groove gage manufactured by A.G. Davis. The customer has been used the groove gage as the photo in the right side. According to the model change the end user has to use a groove gage with other specification, and the end user is looking for a company who handles this groove gage. We have sold formerly the precise index tables called "Ultradex" manufactured by Firm AA Gage. We have not yet contacted with Firm A.G. Davis after A.G. Davis and AA Gage were united to form a new one. After the contact of Firm A.G. Davis we can sell also his products in Japan. The end user specified us the type number and a Federal's indicator, and he requested also some modifications. We have contacted with Firm A.G. Davis about the modifications using the exchanges of E-mails and we got the approval drawing from the end user and could deliver the groove gage without problem.
Home page of Firm A.G. Davis - AA Gage
LAMBRECHT meteo GmbH
Founded 1859, Firm LAMBRECHT meteo GmbH develops, manufactures meteorological instruments. Their Thermometers, Hygrometers, Barometers, Airflow Meters and Drum Recorders are well used at measuring rooms and production sites in industrial field.
Kappa opto-electronics GmbH
Firm Kappa opto-electronics GmbH is special manufacturer for CCD cameras and prepares a simple / powerful KIB software and a development kit SDK.
Video MicroscopeVideo camera for multi-purposes, Video Microscope, Mobile camera unit |
| | |
Home Page of Firm Kappa
|